Bear Christmas Shaker Card

Hey, Crafty Friends!! 

I'm back with Team Xyron today!!

Can you believe it's not even Thanksgiving?!!  Thanksgiving is tomorrow and it already feels like Christmas! So with that in mind, I'll show you how to make this adorable holiday shaker card that is bound to make you smile with Christmas cheer!

Supplies Used

Mega Runner (Xyron)

X150 Sticker Maker (Xyron)

Big Shot (Sizzix)

Magnetic Platform (Sizzix)

Beary Christmas Stamp Set (Maker's Movement)

Beary Christmas Die Set (Maker's Movement)

Stitched Circle Nested Essentials Die (Maker's Movement)

Versafine Onyx Black  (Tsukineko/ Imagine Crafts)

Distress Oxide- Abandoned Coral (Ranger Ink)

Water-Soluble Markers (Derwent Academy)

Watercolor Pencils (Derwent Academy)

Mixed Media Paper

110lb White Cardstock (Recollections)

Chalkboard Cardstock (DCWV)

Patterned Paper (DCWV)

Christmas Carnival Sparkletz (Buttons Galore and More)

Water Pen

White Pigment Ink

White Embossing Powder

Foam Tape

Clear Acetate Sheet (Grafix)

White Gelly Roll Pen (Sakura)

MISTI

Painter's Tape

I started by using my MISTI to stamp my images from the Beary Christmas Stamp Set in Versafine Onyx Black onto mixed media paper.

Next, I colored my images Derwent Academy Water-Soluble Markers and Watercolor Pencils and blended the colors out with a water brush pen.

I used my Big Shot with a Magnetic Platform and the matching Beary Christmas Die Set to die cut my adorable bears.

Then, I added tiny polka dot details with a White Gelly Roll Pen.

To build the card base, I folded an 8 1/2"x 4 1/4" piece of 110 lb white cardstock in half to create a standard A2 size card. I set the card to the side and worked on the card front.

I layered a 4 1/8" x 5 3/8" piece of red cardstock and a piece of 4" x 5 1/4" green chevron paper together and attached them using my Xyron Mega Runner.

Once layered together, I used a Stitched Circle die to cut a window through both layers.

I wanted to break up the stark white background but didn't want to get ink around the edges of the card. So I taped off about a 1/4" perimeter. Then used the cut-out as a template to trace a circle where the window would lay.

With a penciled outline, I shaded Distress Oxide- Abandoned Coral using my Picket Fence Studio Life Changing Brushes.

To create my shaker window, I attached a 4" x 5 1/4" piece of acetate behind the cutout using my Mega Runner. Then attached a border of foam tape around the perimeter of the window.

I ran my previously colored trees through my Xyron "X" Sticker Maker and attached it to the center of shaded area.

I sprinkled in a generous amount of Christmas Carnival Sparkletz and topped it the window panel.

I used my Mega Runner to attach the bears around the window. 

Then, I stamped my sentiment onto black cardstock with white pigment ink and heat embossed it with white embossing powder and attached it to my card front.

And here is my finished card... 

I hope you enjoyed today's Shaker Card project. I had so much fun making it!

I hope you all have a BEARY happy holiday season!!

Thanks for stopping by!!

~Mitsyana

Elphie Selfie Birthday Card & Tag

Hello Crafty Friends!! Happy Hump Day!!

I'm back again with Team Xyron today, and we have something special lined up for you!!

We will be partnering up with Lawn Fawn all week long to bring you tons of crafty fun and inspiration!!

And as an added bonus, both Lawn Fawn and Xyron are each giving away a $50 prize package which includes one $25 gift certificate and one Xyron Mega Runner.

All you need to do to be eligible to win is:

1) Visit BOTH the Xyron and Lawn Fawn on Facebook.

2) Leave a comment on one (or all) of the featured 

Xyron & Lawn Fawn collaborated projects during the entire week.

Easy Peasy Lemon Squeezy, right??!!

For my project I used Lawn Fawn's Elphie Selfie clear stamp set. I was lucky enough to play with set at the Xyron AND the Lawn Fawn Booth during Creativation and immediately fell in love. Not only are the characters adorable but ,with all the different sentiments included, this set is very versatile.

 I started by first stamping my images onto Strathmore Mixed Media Paper. This is a heavy duty, multi-purpose paper, that holds lots of moisture from different mediums with minimum bowing.

Then, I traced and shaded my images using Tim Holtz Distress Markers. 

I used a Aquash Water Brush pen filled with water to blend the colors out.

Next, I used a scissors to cut out the images. 

If fussy cutting isn't your thing, Lawn Fawn also make the coordinating dies for this set (HERE). I, on the other hand, don't mind hand cutting. I sometimes find it very relaxing. 

 For my card front/ back ground I cut out patterned paper from Lawn Fawn's 

Perfectly Plaid Rainbow Petite Paper Pack to the following sizes:

White cardstock Card base- Standard A2 sized card- 5.5"x 8.5" (5.5"x 4.25" folded)

Rainbow plaid paper - 4.25" x 5.5"

White cardstock- 3.75" x 5"

Blue plaid paper- 3.5" x 4.75"

Green plaid- 1" x 4.75"

I ran the blue plaid and white cardstock through the Xyron Creative Station Lite and layered them onto each other, leaving a .25" white border around the blue.

Then I applied adhesive on the 1" x 4.75" strip by running it through the Xyron 1.5" Sticker Maker (aka "X") . I attached it to the bottom of the blue paper creating a blank landscape to place my critters.

 I did not attach my landscape to the rainbow plaid at this point.

I knew I wanted a little dimension to my card so I decided to rain the landscape piece with some home made foam adhesive sheets.

To make my own foam adhesive, I simply took craft foam sheets and cut them down into two smaller pieces, and inserted it into my Creative Station lite. Once through, I trimmed the excess protective film off the sides, flipped the foam faced down and ran it through my machine again. Make sure you burnish your foam for maximum adhesion. Now both sides of the foam have adhesive on them.

I peeled back the protective film off one side of one of the foam sheets and applied it onto my landscape piece.

At the same time I was making foam I also ran through my rainbow plaid paper. This will be for when I attach the entire card front onto my plain white A2 sized card base.

Then, once that part was done, I peeled the other backing off the foam and mounted my landscape piece onto the rainbow sheet.

Now, with the left over adhesive foam sheet, I cut it into .5" strips, then down to little square and rectangles. to fit the back of the stamped images, creating little pop dots for most of my cut-outs, and attaching them to the backs.

Finally sticking them onto their little landscape. All I needed to do was peel the protective film and attach images as desired.

I had a brain fart moment and realized I forgot to stamp my sentiment. Usually I'd do this part onto my paper before doing anything else to it, just to avoid any potential accidents. But I went through with stamping anyway and just my luck... no accidents

I stamped my 'Wish Big' using VersaFine Onyx Black Ink. I love how bold and crisp it stamps.

I found some really thick dark pink and white twine that went perfect with all the colors of the card. So I decided to wrap it a couple times and tie a multi-loped bow onto my card.

I decided to make a tag with the extra paper I trimmed off making my card. These were obviously too small to make another card but big enough to make a tag. I don't like wasting perfectly adorable paper.

Putting it together was a cinch!

The created the tag by snipping off a corner to a 2"x 3.5" rectangle, I flipped it over and laid it faced down and mirroring the other side. lined up the corner to make sure they were straight and even, then took my scissors and made an identical cut. 

Then I took a .5" x 2" strip of leftover green paper and mimicked my card with a landscape view.

Next I ran my tag through my Creative Station Lite ad mounted it on white cardstock and trimmed a .25" border around it.

I also had a little ellie and a pennant leftover from my colored stamped images, to decorate my tag with.

Then,  I punched a hole at the top  of the tag and tied a bow up on top.

And for the final touch, a little faux stitching on both the card and tag, by creating dash lines around the perimeter of both.

And here is my finished Card and Tag set...

Hope you all enjoyed this project!! Thanks for stopping by!!

~Mitsyana Wright

And, just a reminder,

don't forget to enter in our awesome GIVEAWAY by visiting the Xyron and Lawn Fawn pages on Facebook!

Supplies Used

Elphie Selfie (Lawn Fawn)

Perfectly Plaid Rainbow Petite Paper Pack (Lawn Fawn)

Creative Station Lite (Xyron)

1.5" Sticker Maker (Xyron)

Other Supplies Used

Mixed Media Paper (Strathmore)

VersaFine Onyx Black Ink (Tsukineko/ Imagine Crafts)

Tim Holtz Distress Markers (Ranger)

Aquash Water Brush Pen (Pentel)

PITT Artist Pen M (Faber-Castell)

Craft Foam Sheets

Deluxe Paper Trimmer (Martha Stewart)

Scoring Board (Martha Stewart)

Cutterbee Scissors (EK Success)

Pink and White Baker's Twine

Clear Liquid Adhesive

Buttons