Showing posts with label thanksgiving. Show all posts
Showing posts with label thanksgiving. Show all posts

Tuesday, November 5, 2019

Feeling Gratitude Card

Hello, Crafty Friends!!
I'm so sad that October is done and gone but I'm looking forward to the rest of the holiday season. Thanksgiving, here we come!! And I have so many things to be thankful for! This year has been filled with lots of trials but they have helped me grow and learn. Learn to be a better friend, better mom, a better role model, and a way better me... And for that, I am extremely grateful!

So this card I created for the Eileen Hull team was very fitting...


Supplies Used
Eileen Hull Embroidery Hoop (Sizzix- Retired)
Eileen Hull Blends Inks- Melon, Flagstone, Nutmeg (Clearsnap)
Big Shot (Sizzix) 
Mat Board (Sizzix)
Mega Runner (Xyron)
Feeling Gratitude (Waffle Flower)
Achillea Cottage Flowers (I Am Roses)
Versafine Onyx Black (Imagine. Tsukineko)
Pattern Paper (DCWV)
Kraft Cardstock (Recollection)
Twine
Brown Button- Bittersweet (Buttons Galore)
MISTI (My Sweet Petunia)

For this card, I used two of my all-time favorite dies from Eileen Hull Designs... 

The Leaves, Spring and the Embroidery Hoop. Sadly, the Embroidery Hoop has since been retired. But the Leaves, Spring die is still available and remains one that I constantly reach for.

I cut a 5" x 6" piece of white mat board and ran it through my Xyron Creative Station Lite machine. Once through, I flipped it over and ran it again a second time to get adhesive on both sides of the mat board.


I removed the protective film from one side and attached patterned paper to the mat board. Then I trimmed off any overhang with my scissors. Then, I placed my mat board (paper side down) onto my Embroidery Hoop Die.


I ran the die through my Sizzix Big Shot Machine.

And presto... It gave me three (count them... THREE) die-cuts!! You can use all three in your projects but today I'm only going to use the largest of the cuts as a frame. The other two cuts I'll set aside for future projects.


To build the body of my card, I started with a 5"x7" card base made from kraft cardstock. I matted the card with a 4.75" x 6.75" piece of orange cardstock. Then layered that with 4.5" x 6" piece of leaf patterned paper and a 4.5" x 1" strip of knit sweater patterned paper. 

I attached all the pieces together using my Xyron Mega Runner.

Then, attached my mat board embroidery hoop.


To decorate my card, I chose an assortment of papers that were similar in color to the leaves that were in my patterned paper.

I folded the papers in half before die cutting and covered each shape completely and ran it through my Big Shot. This resulted in cutting out the die-cut shape an it's mirror image (see middle picture below).

Then, I used Flagstone, Melon, and Nutmeg Blends Inks to shade my leaf die-cuts. 


Then I put the leaves on the side to concentrate on the sentiment of the card.

I've always loved this stamp from Waffle Flower called Feelin Gratitude. It encompasses my exact thoughts and fills up the Embroidery Hoop perfectly!

I used my Misti stamping tool to stamp my sentiment onto my card with Versafine Onyx Black ink and again onto gray patterned paper. 

Then cut out the banner pieces from the gray paper, added foam adhesive, and attached it over the banner images on the card front.


I used a strong quick-drying glue to attach my leaves to the embroidery hoop. I grouped the leaves into threes and followed the curvature of the hoop.

I added a twine bow topped with a button between the groupings of leaves. 

Next, attached my premade cherry blossoms... I snipped off the stems of the cherry blossoms and spiraled the achillea stems with a skewer. Then attached the cherry blossoms and achillea flowers onto the leaves and surrounded the bow. 


And here is a look at my finished card...


I totally love how this turned out!! The fall colors on this are so calming and not harsh. And couldn't use a little more calm in their lives, right?!!


I hope you enjoyed today's card and it inspires you to create something gorgeous this Thanksgiving season!!

Until next time...
HAPPY CRAFTING!!
~Mitsyana

Friday, November 17, 2017

Feeling Grattitude Wall Art

Hello, Crafty Friends!
I'm back with Team Xyron today and we have been partnering up with Waffleflower all week to bring amazing projects featuring awesome products from both companies.

Thanksgiving is just a few days away and I thought I'd make myself a little reminder... to always express my GRATITUDE. Not just on one day out of the year but every single day. So today I have this framed piece of wall art tutorial to share with you all.


Supplies Used
Mega Runner (Xyron)
Paper Crafting Medley- Iona (Little Birdie Crafts)
Patterned Paper (DCWV)
VersaFine Onyx Black Ink (Tsukineko/ Imagine Crafts)
White Cardstock
Mixed Media Glue
Frame
Jute

First, I gathered my materials. I dismantled my frame and removed the photo mat. I used the mat as a template and outlined it onto the back of my patterned paper with a pencil. Then, I cut out the traced shape using scissors.

I used a craft knife to cut out the inside window. Then cut a back piece from more patterned paper to layer the frame onto. I used my Xyron Mega Runner to layer and attach the two pieces together.


I used Waffleflower's amazing Feeling Gratitude Stamp Set to stamp in the window area of the frame. I used a stamp positioning tool just in case I need to restamp and want exact placement.


I stamped a second time onto plain white cardstock. The second impression didn't need to be perfect. I just stamped it to cut the two banner images.


I ran the two banner pieces through my Sticker Maker. Then applied them directly to the matching areas in the framed sentiment.

Next, I attached my chipboard flourishes onto the frame using mixed media glue. Then attached my burlap flowers and jute bow. Once the adhesive dried I inserted the mat back into the frame.

And here is my finished framed art...

Now, it's good to go!! This baby is ready to be hung on a wall or placed on a mantle or tabletop!


This is such a beautiful saying that holds very true. Feeling and being grateful is wonderful... but unless you express that gratitude no one will ever know it. 


I hope you all enjoyed this tutorial and that it inspires you to create and to share and express your gratitude with those around you!

Until next time...
HAPPY CRAFTING!!
~Mitsyana

***Disclaimer***
This blog is compensated to provide opinion on products, services, websites and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements, I always give my honest opinions, findings, beliefs, or experiences on those topics or products.
The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question.

Monday, November 6, 2017

Quick & Easy Rustic Fall Mason Jar Decor

Hello, Crafty Friends!! And Hello November!! 
Well, with a heavy heart I must say goodbye to my all my Halloween decorations. 
*insert uncontrollable sobbing*

I kept them up for as long as I could before hubby took me by the hand and finally told me it was time to let it go.

So, out with the skulls, spiders, & witches... and in with the gourds and cornucopias!

Today, I'll share how I made quick and easy fall decor from recycled glass spaghetti jars!



Supplies Used
Glass Mason Jars/ Glass Spaghetti Jars
Burlap (DCWV)
2.5" Wide Wired Ribbon (Kirkland)
Mixed Media Glue (Beacon)
Jute Twine

I start by cleaning and removing the labels off of these old mason jar type of glass spaghetti jars. My family eats a lot of spaghetti, and the glass jars they come in are too nice to throw out. So, I often keep them on hand. I clean them out and store them for later to recycle and/ or repurpose them. 

Simple soapy hot water is all I need to remove these labels. If I ran into an occasional rough spot, I simply applied a little bit of goo gone and gave a good rubbing with a paper towel to remove whatever remnants remained.

 I use a measuring tape to measure the circumference. I also measure the height of the areas I want to be covered and decorated. These particular jars have a recessed center. I shall use this area as a marker to where I wrap my burlap and ribbon.

The jars measure about 13.5" inches around and the recessed area measures about 3.5" high.

 Because the circumference was larger than my 12" sheets of burlap, I instead cut 2 - 7.5" pieces of burlap for each jar. I cut the burlap slightly bigger than the circumference to give an overlap.

I ran my burlap pieces through the Xyron Creative Station then burnished the burlap with a bone folder before peeling off the protective film. Then applied the strips to the center of the glass jars.

 Then wrapped them with a 2.5" wide wired ribbon around the center. I used approximately 25" of ribbon for each jar. I tied each ribbon into a simple knot then trimmed the ends at a diagonal to give them a "dovetail".

The burlap gives a nice rustic look. Pairing it with deep orange and brown colored plaid ribbon is an easy way create a "FALL" feel to the look.

Then, I glued and wrapped the lip of each jar with jute twine to finish them off.

My jars are done!! Now to fill them...

And filling them doesn't need to be difficult or expensive.

My backyard borders a pasture and is constantly filled with different wildflowers and grasses. Among them in this slightly tall grass that is similar in look to baby's breath but with smaller white blooms. I'm not sure what it's called but when bunched and bundle together it really completes the rustic feel I was going for.




Simple and pretty!

And when positioned in front of a mirror is made to look a whole lot fuller than it really is! 

I hope you enjoyed my upcycled project and it makes you give those usually discarded jars a second thought. Repurposing them isn't just good for the environment, especially during the holidays, it's good for your wallet too!!

HAPPY UPCYCLING, FRIENDS!!
~Mitsyana

***Disclaimer***
This blog is compensated to provide opinion on products, services, websites and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements, I always give my honest opinions, findings, beliefs, or experiences on those topics or products.
The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question.





Tuesday, September 19, 2017

Happy Thanksgiving- Farm Harvest Card


Hello, Friends!! I'm back with Team Pink with another adorable project! 
I am so glad that the summer heat is dying down. It hasn't gone down that much here in Texas and we still have weather in the low to mid 90's but that is far cooler than the nasty 114-118 temps we've had during the height of summer... Um, Thanks but NO THANKS... I think I'll stay my behind inside!

By next month for sure, we should feel a significant temperature drop. And then HELLLOOOO Fall!!

Then we know what that means... it's time to prep for the one day it's acceptable to gorge till we pass out! THANKSGIVING!! YES!!

And because of this occasion, I decided to make this adorable Scarecrow Farm Harvest card.


Pink & Main Supplies Used
Image 1   


   

Other Supplies Used
Mega Runner (Xyron)
Black Cardstock (Recollections)
Happy Day Stack (DCWV)
Mixed Media Paper (Strathmore)
VersaFine Ony Black Ink (Tsukineko/ Imagine Crafts)
Tim Holtz Distress Markers (Ranger)
White Pigment Ink
Polka Dot Satin Ribbon

I made a 6x6 card using the brown plaid paper from Pink and Main's Pumpkin Spice and the blue cloud patterned paper from the Take Flight paper pad.

Paper Measurements
Brown Plaid: 6" x 6"
Black Cardstock: 5-5/8"x  5-5/8"
Cloud Pattern: 5-1/2" x 5-1/2"
Green Strip: 1-1/2" x 5-1/2" 

 I used Eileen Hull's House Pocket die to create the little barn in the background.  I just added 2 doors instead of one and I cut 1/8" strip from white cardstock and formed X's over the front and layered them on white rectangles that were 1/8" bigger than the doors. Then use o small window laid sideways for the top window the barn.

I attached the barn onto the front of the card using my Mega Runner. Then layered my stamped images in front. First applied the corn stalks then added the scarecrows on top, adding foam adhesive to the backs for added dimension. Then I topped off with a row of pumpkins, again adding foam to the backs for even more dimension.

Lastly, I adhered the whole card front to a 6"x6" mustard yellow card base. Then stamped the phrase Happy Thanksgiving from the Turkey Day Stamp set onto the barn using white pigment ink.

And here is the finished card...


And then... at the very last minute, even after all the picture taking was done, I decided to add a bow... LOL hahaha, I love where creativity takes me!

 Hope you enjoyed this card... and the newfound fall weather!!

Happy crafting, my friends!!
~Mitsy

***Disclaimer***
This blog is compensated to provide opinion on products, services, websites and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements, I always give my honest opinions, findings, beliefs, or experiences on those topics or products.
The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question.

Friday, October 28, 2016

Happy Fall Y'all Treat Boxes


October has been such a fun month—thankfully, it isn’t over yet!
With Halloween in just a few days, we thought we’d share some Harvest-themed projects for your enjoyment; projects that feature the one-of-a-kind Pink & Main products! I just have to say; we have thoroughly enjoyed working with Michelle and her team of amazing crafters (some of which are on our team as well!). They have made this blog hop a winner already! Then to see the variety of projects everyone created…I can’t wait to hear what you think!
So, without any further delay, please take a look at what our designers and what they have created for your enjoyment and inspiration. Once you get back to our blog, please leave us a comment below on what you enjoyed most (design, product, both), and you’ll be in the running for a giveaway! 3 people will be chosen at random to win a free Christmas stack!

------------------------------------------------------------------------------------------------------------------------------------------

Hello Crafty Friends!! We hope you are enjoying the blog hop so far!!
If you just came from my DT Sister, Beth Fiscus' blog, then you are in the right place!! Thank you so much for joining us today and stooping in on my blog for a visit!!!

I really love both wonderful companies!! I'm one a the few that are lucky enough to be on both teams!! And both of the companies are AMAZING!! And so are their products!! I'm absolutely thrilled to be participating in today's hop!!

And, I have these adorable fall treat/ favor boxes to share with you all today! Here is how I created them...


Supplies Used
Old Crow (Pink and Main)

Scarecrows (Pink and Main)

AND COMING SOON...
(FUTURE RELEASE SNEAK PEEK)
   

Twine (Blue Moon Beads)
Other Supplies Used
Big Shot (Sizzix)
Treat Carrier Die (We R Memory Keepers)
Mega Runner (Xyron)
Versafine Onyx Black (Imagine Crafts/ Tsukineko)
Distress Markers- Carved Pumpkin (Tim Holtz)
Le Plume II Markers- Lt. Green, Gray, Orange (Marvy)
Water Brush (Pentec)
Mixed Media Paper 


I started my project by stamping multiple images onto mixed media paper using Versafine Onyx Black Ink.

Then, I outlined my image with my image also adding in shading with just short flicking strokes. then I took a water brush and activated the the ink with water and blended out the color.

I trimmed down my sheet to fit int my die cut machine, then used my (not yet to be release) Stitched Circle Dies from Pink and Main, to cut out my colored images.

I also die cut some scalloped Circles to layer my crows onto. This beautiful green polka dot paper if from DCWV's Autumn Leaves Stack.

I ran my stitched circle through my 3" Xyron Sticker Maker, and layered it onto a scalloped circle die cut.

Using more coordinating paper from the Autumn Stack, I cut out multiple treat boxes and folded along the seams. Then applied adhesive onto the flaps and adhered and assemble my treat boxes together.

Then I die cut out little banners from scraps from my mixed media paper and Onyx Black ink I used earlier. Then I stamped "Happy Fall Y'all" onto each banner. 

The awesome thing about these being clear stamps ... I  can see where I'm stamping AND I can bend and manipulate the shape of this die. Notice how I was able to slightly bend my words and follow the curve of the banners.

Once the ink was dried on the banners, I attached them to the front of each box.
Then attached my scallop circles to the back panel with the handle. 

Then finally, I added twine bow offset to one side and filled my carrier box with candy.


Here is a little close up...

I hope these projects have inspired you to be creative!!

And, don't forget to visit my other DT sisiters!! For more amazing creations!! 
You'll be glad you did!!

Here is the complete BLOG HOP line-up
DCWV 
Yolie 
Jenifer
Pamela 
Pam 
Karen H  
Lisa 
Jessica 
Karen J 
Karla 
Katka 
Beth 
Mitsyana (You Are Here)
Thomisia (Go Here Next)

Happy Crafting Everyone!!
~Mitsy