Daydream Mini Beach Canvas

Hey Gang!! 

It's summertime and scorching hot! Anyone else dreaming of the beach?! 

Today, I made this adorable mini canvas for my sweet friend that has a beach house (wink, wink... you know who you are!!). She's been visiting it more frequently and really enjoying her time away and all the tranquility so I made her this cute wall hanging to remind her of her happy place.

Let me show you how I created it...

Supplies Used

4" x 6" Canvas (Dollar Tree)

X150 Sticker Maker (Xyron)

Big Shot Machine (Sizzix)

Mat Board (Sizzix)

Eileen Hull - House Ornament Die (Sizzix)

Eileen Hull - Grass Die (Sizzix)

Eileen Hull - ColorBox Blends Inks-  Hydrangea, Uniform, Bay, Beach, Frog, Leaf, Stop, Pansy, Golden, Nutmeg ( Clearsnap)

Eileen Hull Molten Dimensions -  White Wonder (Emerald Creek)

Butterfly Stamp Set (Clearsnap)

Top Boss Embossing Pad (Clearsnap) 

ColorBox Embossing Powder - Black (Clearsnap)

White Gel Pen (Sakura)

Misti Stamping Tool (My Sweet Petunia)

Heat Tool

I started by stamping my image onto my mini canvas with embossing ink. I found these cute little canvases from  Dollar Tree. They came in a pack of 3 for a buck, how flipping awesome is that?!! 

Since canvas is very textured already, I wanted to ensure my images stamped out completely so I used my Misti tool just in case My stamped image was missing parts of the image I could re-stamp it without messing it up. I took out the black foam insert before stamping. The canvas is a way thicker material and if I didn't take out the foam the panel wouldn't close.

I used the clouds stamp from the Butterfly stamp set and stamped the image UPSIDE DOWN... who knew clouds upside down can look like waves!! I think it's so cool when you can get multiple uses out of craft supplies. I pored Eileen Hull's Molten Dimensions in White Wonder and heat embossed the shore break. Look at all that gorgeous texture!

Then, I inked the "waves" in  Bay & Beach, "sand" in Golden, and "sky" in Hydrangea & Uniform.

I die cut 4 mini houses out of Mat Board using Eileen Hull's House Ornament die.

I inked them in a variety of Blends inks and pick out the most vibrant ones. I ended up choosing Stop, Pansy, Uniform, and Leaf.

Then used a white gel pen to add the roof and window details.

I ran my little houses through my Xyron X and adhere them to black cardstock. Then fussy cut the houses out. 

I thought my sentiment needed to be just as bold as the houses so I stamped and heat embossed it with black embossing powder.

I die cut grass from a leftover scrap piece of green patterned paper, inked up the edges using Frog and Nutmeg ink. 

Then cut them down into smaller segments and ran the pieces into my sticker maker (Xyron X machine) and adhered them onto my houses and canvas.

How flipping adorable are those little beach cottages??!! I'm dying from overexposure to cuteness!! 

Lastly, I glued on jute twine all along the edge of the canvas to give a more coastal vibe.

And here is my finished project...

I really love how this turned out... especially those waves!! That Molten Dimensions powder really added so much depth and texture to my ocean!!

I hope you enjoyed today's tutorial and are inspired to create your own little canvas masterpiece!

Stop for topping by!

Until next time...

HAPPY CRAFTING!!

~Mitsyana

DIY 3D Carrot Canvas

Hey, Crafty Friends! 

I may not be Peter Cottontail but spring has sprung and, hippity-hoppity, Easter is on its way! Before I start on making Easter baskets for all the little boys and girls (a.k.a. my children), I figured I'll set the mood by making a little Easter decor for my home first. So today I'll show you how I created this simple 3D Carrat Canvas.

Supplies Used

8"x 10" Stretched Canvas (Derwent)

Creative Station (Xyron)

Mega Runner (Xyron)

Fall Basics Stack (DCWV)

Natural Burlap Stack (DCWV)

Big Shot (Sizzix)

Eileen Hull's Flower Layers w/ Heart Petals Die (Sizzix)

David Tutera's Greenery & Flourish (Sizzix)

ColorBox Dyestress Inks- Tomato, Moss (Clearsnap)

ColorBox Art Daubers (Clearsnap)

Paper Blossoms Collection-Tool Kit (McGill) 

Jute Twine

Orange Button (Buttons Galore)

Guillotine Paper Trimmer (Swingline)

Farmhouse chic decor can get on the pricy side. Let me show you how you can recreate the look using scrapbooking supplies... Believe it or not, this carrot is made from FLOWERS & LEAVES!! And **Spoiler Alert** this used less than 2 whole sheet os scrapbook paper!!

First, I gathered my supplies. I knew I wanted to make a canvas. something I could hang on my wall or place on a shelf or mantle. And I knew it absolutely had to have burlap. Burlap screams farmhouse and shabby chic! Then I threw in my love for all thing paper-crafty... bring on the paper stacks!! 

I found this Fall Basics stack from DCWV (yeah, yeah- I know Fall has long since past) but bear with me... this stack had tons of greens, yellows, purples, and oranges... the same colors we also find in Easter!! Score! These are PERFECT! Check your stash, you may have paper stacks that you can use for more than one occasion!!

Once, I had everything in arm's reach I prepped my canvas. No priming here!! I did, however, cut a 7"x 9" piece of burlap and ran it through my Xyron Creative Station and applied it directly onto the center of my canvas!

 I love the different plaid papers that came in the Fall Basics stack. These 2 sheets were deep shades of orange and green that would be absolutely perfect against the burlap.

I used Big Shot and this long stemmed leaf die from David Tutera's Greenery & Flourish set from Sizzix and die-cut 6 stem from the green patterned paper.

For a more natural look and to add depth I shaded the stems and the inner parts of the leaves with ColorBox Dyestress ink in Moss using a sponge dauber. Then shaped the leaves using a ball stylus from the McGill Paper Blossoms Tool Kit.

I free-hand cut out a carrot shape from orange cardstock. Then ran it through my Xyron Creative Station. This will give me a general shape of where to place my flowers. I attached it to my canvas and made sure to leave some room at the top for the stems. Then attached all 6 stems to create the carrot top.

I used the medium sized flower on the Eileen Hull Flower Layers w/ Heart Petals die and cut out about 24 flowers from the orange plaid paper. Then shaded the edges using ColorBox Dyestress ink in Tomato and a sponge dauber.

To add dimension to the flowers, I first folded the flower in half, and then half again. Then in each quartered section, I folded it into thirds. So when opened there's a crease line in between each little scalloped edge.

I used my Mega Runner and applied adhesive to half of each flower, partially folded the flower and attached the flowers into my carrot cut-out. I continued to fill the carrot with flowers but left a small section open at top to attach a bow I made with jute twine and a button.

And here is my finished 3D Carrot Canvas...

I love how darling it turned out...

And the dimension of those flowers really pops off the canvas! Picture does not do it justice!

I hope you enjoyed today's tutorial and it inspires you to create Easter canvas art of your own!

Thanks for stopping by!!

Until next time...

HAPPY CRAFTING!!

~Mitsyana

Canvas Art Using DIY Foil Paper

Hello, Crafty Friends! It's been a while since I've been crafting. I took a short break to take care of my son had surgery on his leg. He's getting better tons better and his poor little leg is getting stronger every day. Which is just in time too! Warmer weather has been peeking its head and soon Spring will be here. And you know what that means... lots of flowers blooming!!

So, to celebrate Spring's arrival, I created this Flower Bloom Wall Art Canvas using...of all things... wait for it... Aluminum Foil!!

Yup, the same stuff you wrap your leftovers with! I used this kitchen staple and made my own DIY SHEET METAL EMBELLISHMENTS that look and feel like, well, metal!! Unlike the foiled cardstock from the craft store, which is just a thin plastic coating. 

AAANNND, it die-cuts like a dream!! 

Let me show you how...

Supplies Used

Creative Station (Xyron)

Big Shot Machine (Sizzix)

Big Shot Plus Machine (Sizzix)

Eileen Hull Leaves Die (Sizzix)

Tim Holtz Stitched Circle Die (Sizzix)

Textured Impressions Plus Embossing Folder- Botanical Swirls(Sizzix)

16"x 20 " Canvas

Gesso (Liquitex)

Black Chalkboard Paint (Prima)

Heavy Duty Aluminum Foil

Clear drying liquid Adhesive

I started my project with a plain 16"x 20" Canvas and applied a coat of gesso. Most canvases come pre-gessoed but I like to add an additional coat anyway, it seems to help my paint go on smoother and helps spread my paint further (at least it does to me, anyway).

I zapped the canvas with a heat gun to speed up drying time.

Then, applied a layer of black chalkboard paint over the entire surface (including the sides).  Then zapped it again once more.

Here is where it gets really good...

I knew I wanted to make metal embellishments but didn't want to just run the foil through my Xyron. NOPE, it would crinkle up in a heartbeat! Even though I used HEAVY DUTY FOIL, IT still didn't have that heft and standing power that I wanted.

So, to firm things up a bit I attached the foil to 110 lb cardstock. Nice, thick, and sturdy 110 lb cardstock!

I simply ran each individual sheets through my Creative Station, peeled the film backer, and attached the sheet to the aluminum.

 When attaching sheets of adhesive start from one end and kind of roll it toward the other end. If you attach straight down you are a more likely to catch air bubbles. 

Smooth out any tiny lumps and bumps with a rubber or silicone brayer.

Look how shiny and smooth it is!! Ooooh, pretty!

Next, I cut my sheets to die-cuttable sizes. I'm saving myself a lot of tears by die-cutting all my petal pieces instead of cutting them by hand. I once hand cut 50 take out boxes for a birthday party once, um, yeah, NEVER AGAIN!!

I had bruises and calluses for weeks. My poor hands took a nasty beating! I'm so glad someone invented die-cut machines and dies! ENTER the Big Shot Machine ...

I knew I wanted "petals" but didn't have any huge petal dies. So, I used an Eileen Hull Leaves Die instead. I die-cut out the foiled sheets then cut off the little stem.

 I also knew I wanted more texture (just not the crinkly kind) to my petals. So I loaded up this HUGE Texture Impressions Plus  Botanical Swirls folder with all my little stemless leaves. This time using my Big Shot Plus machine. These embossing folders were just way too big to fit through my regular Big Shot!

 These metal sheets even emboss like a dream!! 

**SWOON**

And look how well the stitched details show up on these Tim Holtz Stitched Circle Dies! I used this die cut as the center of my bloom.

Starting from the center, I attached the petals with liquid adhesive smallest to largest and worked my way outward.

I made sure to continue even along the sides of the canvas. Anything left overhanging got a bent and tucked over the side and glue down in place. With small children in my house, I didn't want to worry about any sharp edges. So tucked away they went.

LOOK AT ALL THIS GORGEOUS TEXTURE!!

The embossing in person is absolutely STUNNING!!

HAnd here's my final piece. Already up and mounted on my wall!

I hope you enjoyed this project and it has inspired you to create a canvas piece of your own!!

Thanks for stopping in!

Until next time...

HAPPY CRAFTING!!

~Mitsyana

DIY Christmas Canvas Art

Hey, Crafty Friends!

It's beginning to look a lot like Christmas at my house. I'll be honest... I'm a bit slow at getting my Halloween stuff down and put away. In fact, there may or may not be grapevine pumpkins still sitting on my front porch. But I did manage to clear all the skulls and tombstones off my fireplace mantle and drape garland and put up and decorate the tree. So, that has to count for something right?!

I'm not the type to scale my house and hang lights and neither is my husband. So I think I'll stick to simply decorating indoors. Sometimes finding decor to fit you can be hard to do. I wanted something that was festive yet motivational... aaaand... I LOVE PUNS!!! And I knew I wanted to use Santa's SLEIGH in place of the word SLAY... as is KILLIN' IT, OWN IT, SEIZE THE DAY... SHOW THEM WHO'S BOSS!! So I created this totally "punny" Christmas canvas using some Derwent art supplies and my Xyron Creative StationLite. 

Keep reading to see how I created this Christmas Canvas that absolutely slays... I mean, SLEIGHS!! 

Supplies Used

Derwent Academy Acrylic Paints, 24 pk  

Derwent Academy Stretched Canvas, 8"x10" 

Derwent Academy Artist Brush Set, 8 pk 

Derwent Academy Paint Palette, 10 Wells

Xyron Creative Station Lite 

Xyron 5" Repositionable Adhesive Refill 

Sizzix Big Shot

Brenda Walton Sleigh Die (Sizzix)

Tim Holtz Alphabet Die, Letterboard (Sizzix)

Acetate Film (Grafix)

Blue Painters Tape

Gold Paint Pen

Feather Boa

Clear Liquid Glue

I knew I wanted to paint my canvas and not just glue paper to it. But if you don't have an artistic bone in your body, fret not. You can still use your die cuts without adding bulk. You can use them for stencils and masks. Let me show you how...

For my masks and stencils, I like to use thin sheets of acetate (the same stuff you use to make shaker card windows from). They are nice and thin and easy to die cut. I cut my sheets in half ( I kept the protective tissue paper on the back so you could see the sheet. Otherwise, it's very difficult to see by itself).

 I like running my sheets through my Xyron Creative Station or Creative Station Lite using a REPOSITIONABLE refill cartridge before die-cutting. That way the masks are good to go once the shapes are cut out and by using the repositionable adhesive you can use it over and over. Just save the backer once you're done and store it for future use.

 I love this sleigh die I have by Brenda Walton. It's actually part of a 3D box die but the side panels are also gorgeous on its own. And it was my inspiration for my canvas. I die cut it glossy/ shiny acrylic side down.

Before applying it to my canvas, I taped off a border using blue painter's tape. Then used a t-ruler to help with placement so my sleigh laid straight and not crooked like it was either gonna take off into the sky or descend for a landing. 

Then I removed the film backer and added the sleigh to my canvas.

I also die cut alphabets using Tim Holts' Letterboard die to spell the word EVERYDAY. Again I used the t-ruler (it was such a lifesaver) and made letter placement so much easier. 

 Then, I squeezed globs of Scarlet and Crimson Red onto my paint palette. starting with the lighter of the two reds, I painted over my masks. Then added the darker red to the outer edges and blended inward.

You'll notice a white gap where I didn't paint. that was my masked area so it wasn't going to be painted so I didn't need to cover the center completely. I did, however, go back and add more Scarlet red to blend out the harsh dark border. 

Once, I was satisfied I began to remove the masks (while the paint was still wet). I used my piercing tool to help get the pieces off easier.

Next, I removed the painter's tape. Then sped up the drying time of the paint with my heat gun.

 I decided I wanted a border of gold around the red center but didn't trust myself to make an evenly thick line and straight border. So I taped off one with more painters tape. First I edge up the red center, then I eyeballed it and gave about a 1/4" gap. I pressed the tape down firmly then colored in the gap with a gold metallic paint marker.

 After removing the tape, I outlined my masked areas with a black permanent ink pen. Then I filled in the word "EVERYDAY" with black acrylic paint. It definitely made a hige impact!

 Then, I added a black feather boa all along the sides of the canvas using a clear liquid glue. I love all the frou-frou!

And finally, I a satin polka dot ribbon to coordinate. 

I love the thin golden border. It gives definition and makes it oh so fancy!

This really looks like something you buy in a boutique... LOVE it!!

This piece would look great on a wall, on a mantle, or even in a tree like shown here...

I hope you enjoyed today's project and it inspires you to go out there and SLEIGH your winter crafts!

Until next time...

HAPPY CRAFTING!!

~Mitsyana

DISCLAIMERS

**This blog is compensated to provide opinion on products, services, websites, and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements, I always give my honest opinions, findings, beliefs, or experiences on those topics or products.

The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question.

***This blog contains affiliate links, clicking and shopping through these links helps to support and run the Up On Tippy Toes blog at no additional cost to you..***

PrettyNPink Mixed Media Canvas

Hi, Crafty Friends!!

I'm back again with Little Birdie Crafts to bring you another "Clean" Mixed Media Project.

I love mixed media but don't like getting too grungy and dirty. I like the textures and layering but am more drawn to more bright and fresh color palette. 

So, I create my mixed media with my personal style and likes in mind.. because ART is about personal expression and there's no wrong way to do art!

Little Birdie Crafts Supplies Used

Stencil Script Design

Chalk Paint French Rose

Chipboard Garden Butterflies

Chipboard Ornate Pendants 

Renae Blush (Flowers)

Kraft Leaves

Other Supplies Used

Tulle Ribbon

Mixed Media Glue (Beacon)

Pebeo Gilding Wax (Crafter's Companion)

8"x10" Pre-Primed Canvas

2.5"x2.5" Decorative Picture Frame (Michael's)

White Gesso (Liquitex)

Whipped Spackle (Faber-Castell)

Spatula

Paintbrush

Scissors

First, I started by applying whipped spackle onto my pre-primed canvas using a palette knife and Script stencil. As you can see in the pictures below, this is a pretty good sized stencil and it covers most of my 8"x10" canvas. I personally did not need to use painters tape or washi tape to hold the stencil in place. But if you could if you wanted it to be more secure.

I removed my stencil, set the canvas aside to dry, then immediately washed my stencil off. Removal of the spackle is a lot easier while it is still wet and it helps to prevent damage to the stencil.

After the spackle dried I painted the entire canvas(including the sides) with  Little Birdie Crafts' French Rose chalk paint.

Once the paint was dried, I applied Pebeo Gilding Wax onto the raised areas of the canvas and along the perimeter edges. This paste is so easy to use... just gently dip your finger directly into the wax and rub your fingertip across the surface. You don't need too much, a little goes a long way!

I removed the easel and backing off the small decorative frame then attached it to the canvas using mixed media glue.

I prepped my chipboard pieces. First snipping a couple of links off of one of my pendants. (I'll save it to add it to the top of my other later to elongate it). 

I prepared a texture paste by mixing 1 teaspoon white gesso with about 1/4 teaspoon - 1/2 teaspoon of texture powder.

I applied the mixture to all my chipboard pieces, making sure to get in between the small creases and along the sides.

Once the pieces were fully dried, I rubbed more gilding wax over the raised textured areas. The wax has a creamy consistency and is very easy to apply and very easy to wash off. Simply wash off with soap and warm water to remove.

I applied the Garden Butterflies Chipboard piece onto the front of the decorative frame with more mixed media glue.  

Then arranged the Renae Blush flowers and leaves and Kraft Leaves around the decorative frame in a cascading fashion, tucking the leaves behind the flowers. Once I achieved the look I wanted, I secured the pieces in place with mixed media glue.

I love how elegant the Renae Blush flowers are. The centers of the flowers are filled with pearl beaded stamens and rhinestones. 

And here is my finished canvas...

Look at all these amazing details!! Those flowers absolutely heavenly!!

And the tulle surrounding the canvas is so dreamy!!

I hope you enjoyed this mixed media tutorial! 

I absolutely adore this style I hope it inspires you to give it a try!!

Until next time...

HAPPY CRAFTING!!

~Mitsy